Audi ECU Clone Service
Audi engine control units across the ME, MED, EDC, and Simos families can be cloned at the chip level on the bench. We read the original ECU Flash and EEPROM and write every byte onto a compatible donor of the same hardware family — including VIN, component protection data, immobilizer pairing, and any aftermarket tuning overlay where readable. Cloning is the most common alternative to dealer replacement when the original ECU has failed but is still readable.
Available Services
Home › Audi › ECU / EDC › Audi ECU Clone This listing is for the CLONE SERVICE OF YOUR MED9.1 or MED9.1.1 MODULE ONLY! Read description carefully! You must ship another donor ECU with exact same part number and HW number see pic above for reference and then ship to KARMAN AUTO. If you have a AUDI [...]
Home › Audi › ECU / EDC › Audi ECU Clone VW or AUDI ECU CLONE from 2006 and newer. This service is for VW or AUDI (VAG) ENGINE CONTROL MODULE ECU Clone ( copy ) from year 2006 and up. OPTIONS: ECU Cloning is procedure where the original ECU information is copied to the [...]
Home › Audi › ECU / EDC › Audi ECU Clone This service is for VW or AUDI (VAG) ENGINE CONTROL MODULE ECU Clone ( copy ) up to year 2005. OPTIONS: ECU Cloning is procedure where the original ECU information is copied to the replacement ECU, and allows it to be reused. The Mercedes [...]
Home › Audi › ECU / EDC › Audi ECU Clone SIMOS 18.1 ECU Clone or Immo Off ECU cloning and Immo off services are critical for maintaining and upgrading vehicles equipped with SIMOS 18.1 ECUs. This blog post delves into the offerings by Karman Auto, making it easy for VW and Audi owners to [...]
SIMOS 6.22 SIMOS 6.24 ECU CLONE OR IMMO OFF VW OR AUDI
Home › Audi › ECU / EDC › Audi ECU Clone Audi, VW, Ferrari, Bentley ECU Computer Cloning, IMMO OFF, Programming Service Bosch ME17.1.X ME17.5.X The VW or AUDI ECU IMMO OFF OR CLONE FOR Bosch ME17.1.X ME17.5.X is a specialized service designed for replacing Engine Control Module (ECU) units in VW or AUDI vehicles [...]
Home › Audi › ECU / EDC › Audi ECU Clone VW or AUDI MED9.1 OR MED9.1.1 Immobilizer Delete immo off 2007 to 2016. This service is for VW or AUDI ( VAG ) MED9.1 AND OR MED9.1.1 Immobilizer delete. Does you car start and die in 2 seconds? Does your IMMO light flash on [...]
Not Sure Which Service to Choose?
If you are unsure which option matches your Audi module, the safest path is to email or text us photos before ordering: full label of the original module (the one you want serviced), full label of the donor module if you already have one, the part number, hardware revision, and software/calibration sticker, and a photo of the connector pinout if visible. We will confirm whether the service is supported for your specific part number and hardware revision before you order and ship.
Compatibility Warning
Cloning requires a donor ECU of the same hardware family — same part number prefix, same processor, same hardware revision. MED9.1 to MED9.1, Simos 18.1 to Simos 18.1, EDC17CP variant to matching EDC17CP variant. Mismatched donors will not clone successfully.
What to Ship
- Your original Audi module (the failed/locked unit), clearly marked “ORIGINAL”
- If applicable: a donor module, clearly marked “DONOR” — same part number family and hardware revision as the original
- Your order receipt printed, or order number written on a slip in the box
- Your return shipping address
- Ship to the address shown on your order receipt at checkout (we operate from 2 locations and route based on tool availability and turnaround)
Related Audi Services
- Audi ECU / EDC Services
- Audi ECU VIN Programming
- Audi ECU IMMO Off
- Audi BCM / CCM (J519) Services
- Audi TCM / Mechatronic / DSG Services
- Audi Airbag / SRS Module Services
- All Audi services
FAQ
What does the clone preserve? Flash and EEPROM copied 1:1 — including VIN, component protection where readable, immobilizer pairing, software calibration, and any aftermarket tuning overlay.
Will I need VCDS / ODIS coding after the install? In most cases no — the donor presents the diagnostic tool with the same data as the original.
What if I want to remove the immobilizer at the same time as the clone? Several Audi ECUs support a combined clone-or-immo-off service. Send us your ECU label and we will confirm whether your unit supports both.