Do I need to send a key with the Nissan BCM?

No. We do not need physical keys - only the key pairing data inside the original BCM EEPROM.

What if my original Nissan BCM is completely dead?

We can still read the EEPROM directly at chip level even when the module will not power up.

Will the odometer change after the Nissan BCM clone?

No. We transfer your exact mileage from the original BCM to the donor.

Why does the donor Nissan BCM have to have the same part number?

The internal flash and EEPROM layout is tied to the BCM part number. A different part number has a different memory map.

Nissan BCM Clone Service Body Control Module Programming

Name: NISSAN BCM CLONE SERVICE
Brand: Nissan
SKU: NISSAN-BCM-CLONE
Price: 200 USD
Availability: InStock
Rating: 5 (1 reviews)

Can you clone a Nissan BCM (Body Control Module)?

Yes. Karman Auto clones Nissan BCM (Body Control Module) units nationwide by mail-in across Altima, Maxima, Sentra, Rogue, Pathfinder, Murano, Titan, Frontier, Versa, Armada, 370Z, and GT-R. We read VIN, mileage, key data, immobilizer pairing, and configuration coding from your original BCM and write it to a matching donor — returns 100% plug-and-play. No CONSULT, no NERS, no dealer programming. BBB A+ Rated, 27 years bench-level work since 1999.

What is the Nissan BCM (Body Control Module)?

The Nissan BCM is the central body-electronics computer that controls power windows, central locking, exterior and interior lighting, alarm and anti-theft, keyless entry, wipers, defrosters, and CAN bus communication between body modules and the IPDM, ECM, and combination meter. On Nissan vehicles equipped with the NATS (Nissan Anti-Theft System), the BCM is also a key part of the immobilizer chain — paired with your transponder keys, ECM, and combination meter.

Nissan calls this module by different names in their service documentation depending on year and model: BCM, IPDM (Intelligent Power Distribution Module — separate but often confused), BC/M, or just “Body Control Module.” All are the same family of electronics.

Common Nissan BCM failure symptoms

Power windows stop working on one or more doors
Central locking fails — doors won’t lock or unlock with key fob
Interior lights stay on, won’t turn off, or flicker
Headlights / tail lights / turn signals stop working
Keyless entry remote stops working — no response from key fob
Engine won’t start — NATS immobilizer fault (security light flashes on dash)
Wipers run continuously or won’t run at all
Dashboard warning lights illuminate randomly
Battery drain — BCM stuck “awake” pulling current overnight
Fault codes B2192, B2193, B2195 (immobilizer / BCM communication)

What causes Nissan BCM failures?

Water damage — leaks from windshield seals, sunroof drains, or AC condensate reach the BCM under the dash
Battery jump-start surges — voltage spikes from jump-starts can damage the BCM’s internal microcontroller or EEPROM
Failed reflash — interrupted reprogramming attempts during dealer service can corrupt the BCM
Accident damage — collision impact can break solder joints on the BCM circuit board
Age-related capacitor failure — common on 2010-2015 BCMs with electrolytic capacitor degradation
EEPROM data corruption — the BCM’s NEC EEPROM can corrupt under low-voltage cranking events

Supported Nissan models and year ranges

Our Nissan BCM clone service covers virtually all Nissan models equipped with a BCM from 2003-2024. Key models:

Altima — 2007-2024 (L32, L33, L34 chassis)
Maxima — 2004-2023 (A34, A35, A36 chassis)
Sentra — 2007-2024 (B16, B17, B18 chassis)
Rogue — 2008-2024 (T31, T32, T33 chassis)
Pathfinder — 2005-2024 (R51, R52, R53 chassis)
Murano — 2003-2024 (Z50, Z51, Z52 chassis)
Titan / Titan XD — 2004-2024 (A60, A61 chassis)
Frontier — 2005-2024 (D40, D41 chassis)
Versa — 2007-2024 (C11, N17, N18 chassis)
Armada — 2004-2024 (Y61, Y62 chassis)
370Z / 350Z — 2003-2020 (Z33, Z34 chassis)
GT-R — 2009-2023 (R35 chassis)
Cube, Juke, Leaf, NV200, Kicks, Rogue Sport — all years

If you don’t see your model listed, email us the year + model + VIN and we’ll confirm coverage before you ship.

No CONSULT, NERS, or dealer programming required

Once we clone your data onto the donor BCM, the replacement is fully matched to your VIN, immobilizer, and configuration. You install it the same way you’d install any other Nissan module. There is no dealer-side step. No Nissan CONSULT III+ tool. No NERS (Nissan Engineering Reprogramming Service). No subscription programming token. Your original keys keep working — NATS pairing is preserved.

What to send with your Nissan BCM clone order

Your original (failed) Nissan BCM — labeled “ORIGINAL”
A matching donor BCM with the exact same part number on the case label — labeled “DONOR.” The part number sticker (e.g., 284B1-XXXXX or similar Nissan format) must match precisely. Mismatched part numbers cannot be cloned together.
A note with your VIN, current vehicle mileage (from dashboard), and contact phone or email

If you’re unsure whether your donor part number matches, email a photo of both module labels before shipping and we’ll confirm compatibility first.

Karman Auto Nissan BCM service — frequently asked questions

Can you clone any Nissan BCM (Body Control Module)?

Yes. Karman Auto clones every common Nissan BCM from 1998 through current — Altima, Maxima, Sentra, Rogue, Murano, Pathfinder, Armada, Frontier, Titan, Versa, Juke, Cube, NV200, Leaf, 350Z, 370Z, GT-R, Quest, and Infiniti G/M/Q/QX models. We have been doing bench-level Nissan electronics longer than any active US competitor — since 1999, 27 years in the same industry.

What does Nissan BCM cloning actually do?

We read the full flash and EEPROM from your original BCM (VIN, mileage, NATS immobilizer key data, coding, country setting, and option flags) and write that exact data into a matching donor BCM. The donor then behaves as your original module. Install it in the car and it works — no NERS, no CONSULT, no dealer step.

How long does a Nissan BCM clone take?

Typical bench turnaround is 24-48 hours from when we receive your modules. We ship back the same day cloning is complete. USPS Priority both directions means most customers have their cloned BCM back in 5-7 days door to door. BBB A+ rated and proven across 27 years of bench-level work.

Will my Nissan keys still work after the BCM clone?

Yes. The NATS (Nissan Anti-Theft System) immobilizer pairing data lives inside the BCM EEPROM. We copy that data byte-for-byte to the donor, so every key that worked before the clone continues to start the car. No re-learn, no programming, no dealer trip.

Do I need a donor Nissan BCM or just send my failed one?

BCM cloning requires a donor with the same part number as your original. If you do not have a donor, we can usually source one — message us with your part number first. We have been sourcing OEM Nissan donor modules since 1999 and maintain working relationships with US dismantlers.

Why does the donor Nissan BCM have to match the part number exactly?

The internal flash layout and EEPROM map are tied to the BCM part number. A donor with a different part number has a different memory map and cannot accept the cloned data correctly. The number is on the white sticker — verify it matches before shipping. We have refused to clone mismatched modules for 27 years specifically to protect customers from no-start failures.

What are the symptoms of a failing Nissan BCM?

Common BCM failure signs include intermittent no-start, immobilizer light blinking with keys present, power windows or door locks dead, interior lights stuck on or refusing to turn on, wipers not parking, dome light delay broken, fault codes B2192, B2193, B2195, B2196, U1000, U1001, U1010, and “Anti-Theft Active” messages on the dash. We see these symptoms daily — 27 years of pattern recognition.

What causes Nissan BCM failure?

The number one cause we see is water intrusion — Nissan BCMs sit under or behind the dash, and a leaking windshield, sunroof, or AC evaporator drain floods the module. Other causes include jump-start voltage spikes, failed alternator regulators dumping over-voltage, lightning strikes, accident damage, and internal capacitor degradation on 2007-2015 modules. 27 years of failure analysis backs every diagnosis we make.

Does the Nissan BCM clone require CONSULT, NERS, or dealer programming?

No. The whole point of cloning is that no dealer step is needed. Programming a brand-new replacement BCM the conventional way requires Nissan CONSULT III/III+ and a NERS (Nissan ECU Reprogramming Subscription) account costing thousands per year. Karman Auto bypasses that entirely — install our cloned BCM and the car starts.

Where is the BCM located on most Nissan vehicles?

On most Nissan models the BCM is mounted behind the lower dash on the driver side, above the kick panel, or behind the glovebox. On Altima 2007-2012 it is behind the driver kick panel. On Rogue and Murano it is behind the glovebox. On Titan and Frontier it is under the dash on the driver side. We provide pull instructions for any model — 27 years of hands-on experience across every chassis Nissan has built.

Can you clone a water-damaged Nissan BCM that will not communicate?

Yes. Even when the BCM is bricked at the vehicle CAN/K-line level we can still read the EEPROM and flash directly at chip level on the bench. That is how we recover VIN, mileage, NATS data, and coding from dead Nissan BCMs that no dealer scan tool can talk to. This kind of bench-level recovery is what 27 years of EEPROM work specifically enables.

Will the odometer reading change after the BCM clone?

No. We transfer your exact mileage from the original BCM EEPROM to the donor. The dashboard reading stays the same. Karman Auto does not roll back or alter mileage under any circumstance — that has been our policy since day one in 1999.

Is Nissan BCM cloning legal?

Yes. Module cloning for repair purposes is fully legal in all 50 states. We preserve your original VIN and mileage exactly — no alteration, no rollback. We have operated under BBB A+ accreditation for the last 17 years and have been in business 27 years without a single compliance issue.

Do you clone Infiniti BCMs too (G35, G37, Q50, QX60, FX35)?

Yes. Infiniti uses the same BCM architecture as the equivalent Nissan platform — G35/G37 share Nissan 350Z/370Z internals, Q50/Q60 share Altima, QX60 shares Pathfinder, FX35/FX45 share Murano. Same clone process, same 24-48 hour turnaround, same NATS preservation. 27 years of Nissan/Infiniti bench work.

Why choose Karman Auto over Module Experts, Circuit Board Medics, or other Nissan BCM services?

We have been doing bench-level automotive electronics since 1999 — 27 years, longer than any active US Nissan BCM service. BBB A+ accredited. 5.0/304 customer reviews. Free YouTube tutorials on Vehix411 (5,168+ videos). Lifetime warranty on every BCM clone. 24-48 hour bench turnaround. We have outlasted every competitor that tried to do what we do, and we keep showing up because we know this work cold.

27 years bench-level experience — proven on YouTube

Karman Auto has been cloning Nissan BCMs, ECMs, IPDMs, and combination meters at the bench level for 27 years. Our VEHIX411 YouTube channel documents real bench work on real customer modules — proof of how long we’ve been doing this. When you ship your Nissan BCM to Karman Auto, you’re sending it to the same hands other shops learn from.

BCM MODULE CLONNING SERVICE FOR NISSAN.
The Body Control Module (BCM) Clone Service is a convenient solution specifically designed for NISSAN vehicles. This service allows customers to effortlessly install a used BCM into their vehicles by cloning all the necessary data from their original unit onto the replacement module. With this service, our team will meticulously copy the BCM’s mileage, VIN number, key data, and program calibrations onto the replacement module, ensuring a seamless transition and optimal functionality.

– Specifically designed for NISSAN and INFINITI vehicles
– Clones all necessary data from the original BCM onto the replacement module
– Includes mileage, VIN number, key data, and program calibrations

– Cost-effective alternative to purchasing a brand new BCM module and programming at the dealer
– Allows for the installation of a compatible replacement BCM without the need for additional programming or reprogramming services
– Solves the issue of car not starting if a donor BCM is installed without programming the keys

1. Add the service to your cart, proceed with payment, and print the receipt.
2. Ship both your original BCM and the replacement unit to our facility at KARMAN AUTO.
– Clearly mark the original unit as “OLD” and the replacement unit as “NEW” to indicate the read/write direction.
– Ensure that the part numbers match between the donor and original BCM.

Our experienced technicians perform the BCM cloning service with meticulous attention to detail. We adhere to industry-standard practices and utilize high-quality tools and equipment to ensure a reliable and accurate cloning process.