Mercedes Benz 2000-2013 EIS Ignition Switch Cloning Service

Mercedes Benz Year 2000 to 2013 EIS Ignition Switch Cloning Reprogramming Service.

HOW IT WORKS:

Remove your EIS and KEY from your car.
Include a matching part number donor EIS module in the package when you ship.

Add to cart, pay and send BOTH EIS modules marked old (original) and new (used or new donor EIS) with a receipt or order number to:

KARMAN AUTO

Once we receive your package, we will  CLONE your EIS, and send the package back to you within 1 Business day (Mail takes 2-3 Business days to get to you each way )

– If you need it overnighted to you please include and overnight return slip.

Once you receive the module, back, Just install and start the car. That’s IT!!!

Mercedes EIS / EZS Immobilizer Key Module Problems Symptoms are:
Unable To Turn The Key
Unable To Start The Car
Turn The Key – But Car Won’t Start
Intermittent Ignition Key Faults
Vehicle not responding to remote

If the EIS unit becomes faulty, the key will not turn & start the engine, this function will be de-activated and the module will be locked for security purposes. This will stop the engine from starting. It is very unfortunate but also a very common problem as there are many reasons as to why these units fail. Some of the most common reasons are:
Jump Starting Whilst Key Is Inserted
Power Surge
Low Battery Voltage

All of the above can cause memory loss or corruption of the EIS module and it cannot be repaired or re-flashed using the usual Mercedes diagnostic systems. At this point most technicians will advise you to purchase a new ignition unit which can work out extremely expensive.

One of the main problems is the CPU chip inside fails or for example crashes just like a computer or PC

Common problem with intermittent functionality of older/original EIS with Motorola Microprocessor HC08 (Maskset 4J74Y) failure, resulting in key recognition problem.

List of Mercedes or Sprinter vehicles covered in this Mercedes Benz 2000-2013 EIS Ignition Switch Cloning Service.

A-Class W169
B-Class W245
C-Class W202 W203 W204
E-Class W210 211 W212 W207
S-Class W220 W221
ML-Class W164
GL-Class X164
CLK-Class W208 W209
CLS-Class W219
GLK-Class X204
G-Class W463
V-Class W639
CL-Class W215 W216
SL-Class R230
SLK-Class R171
R-Class W251

Some EIS Part #s:
A 164 905 15 00
A 203 545 01 08
A 203 545 05 08
A 203 545 06 08
A 210 545 00 08
A 210 545 10 08
A 215 545 00 08
A 215 545 08 08
A 220 545 03 08
A 220 545 07 08
A 220 545 08 08
A 220 545 09 08
A 230 545 07 08
AND MANY MORE PART NUMBERS NOT LISTED HERE

1:1 EIS Clone Programming Service
This service is a one-to-one clone of your original Mercedes EIS / EZS module to a matching donor unit. We read the data from your original EIS and write it to the donor EIS, including the VIN, key data, and SCN coding.

This is a read and write cloning service intended to make the donor EIS match the original data from your vehicle.

Customer must provide a matching donor EIS with the correct part number. Original EIS data must be readable for cloning to be completed.

TS: W230 ATL CLN FF EPR THN WRT

Watch how our bench service works

How our KEY clone service works. Bench demonstration on another vehicle — the read/write method is identical on your Mercedes.

Mercedes calls the EIS (Electronic Ignition Switch) and EZS interchangeably depending on chassis. This Mercedes Benz 2000–2013 EIS ignition switch cloning service covers the W203, W204, W211, W212, R171, R230, and related Mercedes platforms that use the EIS or EZS ignition module. Our bench cloning process transfers the original key data, VIN, and component protection from your damaged EIS to a matching donor unit, so no dealer SCN coding is required after install.