Name: Arctic Cat ECU Clone & ECM Programming Service
Price: 300 USD
Availability: InStock

Arctic Cat ECU Clone & ECM Programming Service

$300.00

Arctic Cat ECU / ECM / PCM clone & programming service performed at the chip level on the bench. We read the original Arctic Cat engine control unit and write every byte onto a compatible donor module — including VIN, immobilizer pairing data, and customer parameters where readable. The most common alternative to dealer ECU replacement when the original module has failed but is still readable.

Nationwide mail-in service — 2 locations; shipping address shown at checkout.

Arctic Cat ECU Clone & ECM Programming Service

Karman Auto offers Arctic Cat ECU / ECM / PCM cloning and programming services via mail-in for many Arctic Cat models. We perform bench-level reads and writes — your original module is duplicated 1:1 onto a compatible donor. Cloning is the standard alternative to dealer ECU replacement when the original module has failed but is still readable at the chip level.

What this service includes

Bench read of the original Arctic Cat ECU Flash and EEPROM at the chip level.
1:1 write of every byte onto a compatible donor ECU of the same hardware family.
VIN, immobilizer pairing data, software calibration, customer parameters, and any aftermarket overlay preserved where readable.
Pre-clone backup of both modules filed under your order number.
Bench verification before return shipping.

Compatibility requirements

Cloning requires a donor ECU of the same hardware family — same part number prefix, same processor, same hardware revision. Mismatched donors will not clone successfully. Send us photos of both module labels (original and donor) before purchasing the donor to confirm compatibility.

What to ship

Your original Arctic Cat ECU (the failed/locked unit), clearly marked “ORIGINAL”.
A donor ECU of the same hardware family, clearly marked “DONOR”.
Your order receipt printed or order number written on a slip in the box.
Your return shipping address.
Ship to the address shown on your order receipt at checkout (we operate from 2 locations and route based on tool availability and turnaround).

Turnaround

Typical turnaround is 1–3 business days from receipt of both modules. Shipping adds 2–4 days each way depending on service.

FAQ

Which Arctic Cat ECUs are supported? Coverage depends on the specific ECU family, hardware revision, and donor availability. Send us a photo of your ECU label before ordering if you want us to confirm support for your specific unit.

Do I need to ship both modules? Yes — original plus donor of the same hardware family is required for cloning.

Will my keys still work after the clone? In most clone services we transfer supported VIN and immobilizer pairing data when readable, so existing keys typically continue to work.

What if my Arctic Cat ECU is dead? Many failed ECUs are still readable at the chip level. Send us photos of the label and a description of the failure — we will tell you up front whether the data is recoverable before you ship.

Will I need a dealer visit after the clone? In most cases no — the donor presents the diagnostic tool with the same data as the original.

Can the clone preserve an aftermarket tune? If the tune lives in the ECU Flash that we read, yes — it is copied 1:1 to the donor.

About Karman Auto

Karman Auto has been performing ECU / ECM / PCM clone and programming work since 1999 — 25+ years of EEPROM and chip-level expertise across dozens of OEM and aftermarket controller families. Nationwide mail-in service from 2 locations.