Ford
Ford ECU & Module Programming Services
Karman Auto provides professional Ford ECU cloning, VIN programming, BCM programming, cluster mileage correction, airbag module reset, and key programming services. All work is performed at the bench level using direct EEPROM read/write, so your vehicle’s factory configuration, immobilizer data, and VIN stay intact.
We service F-150, F-250 Super Duty, Mustang, Focus, Fusion, Escape, Explorer, Expedition, Edge, Ranger, Bronco, and Transit, and many more. Send your module in and we’ll return it plug-and-play ready — no dealer visit required.
Common Ford Services
- ECU / ECM cloning — transfer data from a failed or locked ECU to a replacement unit
- VIN programming & IMMO matching — write the correct VIN and immobilizer keys to a used module
- Instrument cluster mileage correction — match odometer to the vehicle’s true mileage after repair
- BCM / gateway module programming — clone or renew a failed body control or gateway module
- Airbag SRS crash reset — clear crash data and restore module to ready state
- Key programming & IMMO off — when original data is unreadable
Nationwide mail-in service, 24-hour bench turnaround, and a warranty on every repair. Typical savings versus dealer programming: 50–70%. Ship your Ford module to us and have it back to you in days.
Browse supported Ford services below, or contact us with your VIN and part number if you don’t see your exact module listed.
This service is for FORD LINCOLN cars and trucks instrument cluster ( speedometer, dash ) clone service ( copy and paste). BOUGHT A USED CLUSTER CAR DONT START ? BOUGHT A USED CLUSTER AND WRONG VIN ? BOUGHT A NEW OR USED CLUSTER AND DEALER TOLD YOU THAY CANT PROGRAM IT ? If your cluster [...]
Ford Powertrain Control Module PCM or Engine Control Module Clone Service This listing is for the CLONE SERVICE OF YOUR FORD ECU. Read description carefully! You must ship another good donor ECU with the same part number to KARMAN AUTO. If you have a FORD and your ECU is bad, ( Flooded, Burnt or Electrical [...]
BCM MODULE CLONNING SERVICE FOR FORD. The Body Control Module (BCM) Clone Service is a convenient solution specifically designed for FORD vehicles. This service allows customers to effortlessly install a used BCM into their vehicles by cloning all the necessary data from their original unit onto the replacement module. With this service, our team will [...]
Ford Powertrain Control Module PCM or Engine Control Module Clone Service in BOOT MODE This listing is for the CLONE SERVICE OF YOUR FORD ECU. Read description carefully! You must ship another good donor ECU with the same part number to KARMAN AUTO. If you have a FORD and your ECU is bad, ( Flooded, [...]
ECU: MEDG9.8, MG1CS015, MEDG17.0, MG1CS018, MG1CS015, MD1CP006, EDC17CP05, EDC7C1, 5WY8 OnCE, EDC17CP65, MG1CS019
Mail-in Ford ECU, ECM and PCM VIN programming service. We write or change the VIN in a compatible Ford replacement engine computer. VIN write only does not make the vehicle start or perform PATS/key/module synchronization.
Complete CEM Module Cloning and Programming Service for Volvo, Land Rover, Jaguar, and Ford Vehicles The CEM (Central Electronics Module) with the M32C (M30882FJ) processor and 25320 EEPROM is a crucial component in your vehicle’s electronic systems, controlling essential functions such as lighting, climate control, and communication between ECUs. If you’re looking to replace or [...]
The Ford Explorer BCM is a crucial part of your vehicle’s body control system. Our BCM cloning service ensures optimal performance by replicating data from your old BCM to a new donor BCM, maintaining your vehicle’s reliability and functionality. Common Issues with BCMs: BCMs can encounter several problems that necessitate cloning, often due to damage. [...]
The Ford Mustang BCM is a crucial part of your vehicle’s body control system. Our BCM cloning service ensures optimal performance by replicating data from your old BCM to a new donor BCM, maintaining your vehicle’s reliability and functionality. Common Issues with BCMs: BCMs can encounter several problems that necessitate cloning, often due to damage. [...]
The Ford F-150 BCM is a crucial part of your vehicle’s body control system. Our BCM cloning service ensures optimal performance by replicating data from your old BCM to a new donor BCM, maintaining your vehicle’s reliability and functionality. Common Issues with BCMs: BCMs can encounter several problems that necessitate cloning, often due to damage. [...]
The Ford Ecosport 1.5 TDCi 6MT ECU is a crucial part of your vehicle’s engine management system. Our ECU cloning service ensures optimal performance by replicating data from your old ECU to a new donor ECU, maintaining your vehicle’s reliability and functionality. Common Issues with ECUs: ECUs can encounter several problems that necessitate cloning, often [...]
Ford Ranger ECU clone service for T6 global Ranger (2011+) 2.2 TDCi / 3.2 TDCi / 2.0 EcoBlue and US Ranger (2019+) 2.3 EcoBoost / 2.7 V6. Full flash plus EEPROM transferred to a matched donor so the truck starts with your original keys. Clone-only service — you supply both the failed ECU and a matching donor. Nationwide mail-in, 24-hour turnaround, 12-month warranty.
Ford Focus Hybrid and C-Max Hybrid ECU clone service covering 2013-2018 US-market models — including Energi plug-in hybrid variants. Full PCM image transferred to a matched donor so the car starts with your existing keys, no dealer IDS session required. Clone-only service — you supply both the failed ECU and a matching donor. Nationwide mail-in, 24-hour turnaround, 12-month warranty.
The Ford Transit Custom BCM (Body Control Module) is an essential component of the vehicle’s electrical system. However, it is prone to failure, which can lead to various issues such as malfunctioning lights, indicators, full beam, and central locking problems. If you find your BCM to be faulty and require a replacement, our Ford Transit [...]