VOLVO SEMI TRUCK TRACTOR Speedometer Gauges Dashboard / Instrument Cluster Repair PARTS

VOLVO SEMI TRUCK TRACTOR SPEEDOMETER GAUGES CLUSTER REBUILD REPAIR PARTS. $20 EACH stepper motor if you have a cluster with 7 or 10 gauges you will need to add the quantity in the shopping cart. PARTS  FOR 2003 and NEWER VOLVO SEMI TRUCKs Are you having problems with the Gauges NOT working or sticking. Speedometer Tach Gas Temp Battery Oil Tranny temp NOT WORKING in your VOLVO SEMI TRACTOR TRUCK VN, VNL SERIES, or VOLVO BUSES, where they are fluttering, sticking, reading incorrectly, or where the oil pressure is pegged out to max? or just refusing to work. Than this service is for you. If you were actually in an accident then you may want to look for a truck accident lawyer to help you get this service covered by the person at fault of the accident. Gauges fluttering, sticking, reading incorrectly, reading 120 MPH, or where the oil pressure is pegged out to max or just refusing to work. This part is for GAUGES ( stepper motors ) not working or sticking. We replace all 10 stepper motors. Our stepper motors are new and have a lifetime part warranty. ( other repair service offered on the web will use same motors that were built for Volvo will go BAD in a short time )  Vehicles Covered for this Repair : 2003 , 2004 , 2005 , 2006 , 2007 , 2008 , 2009 , 2010 , 2011 , 2012 Volvo semi trucks VOLVO CLASS 8 TRUCKS VN 430 VN 630 VN 670 VN 730 VN 780   VOLVO TRUCKS VNL 300 VNM 200 VHD 430 * IF YOU DONT SEE YOUR TRUCK  NUMBER E_MAIL US * [email protected]

Buying a Refurbished Volvo Truck Cluster vs. Sending Yours In

This listing is for a fully rebuilt, bench-tested Volvo truck instrument cluster shipped ready to install: not the mail-in repair service. We keep a rolling inventory of reconditioned units for the most common fleet fitments so a driver can be back on the road in 24 hours instead of waiting a week for a repair turnaround. Send us your VIN and the part number on your existing cluster and we will match a rebuilt unit from stock, pre-program it to your truck mileage, and ship it out same-day on orders placed before 2 PM Central.

Trucks and Part Numbers Covered

The refurbished cluster fits VNL 300, 430, 630, 670 and 780; VNM 200 and 430; VNR 300 and 640; VHD axle-back and axle-forward; and the older VT 800 sleeper. Part numbers we cross-reference include 82361624, 85104056, 21761075, 22327143, 22316860, 82547093, 85117053 and 22894551. When Volvo supersedes a part number, which they do often, the rebuilt unit we ship is compatible across the supersession chain.

What is Done to Every Cluster Before It Ships

Each unit is disassembled to the board level, capacitors are replaced on the switching supply, the LCD ribbon and display controller are re-seated or replaced, gauge stepper movements are replaced where worn, warning-lamp LEDs are bench-verified, the J1939 CAN transceiver is tested against a simulator at full bus load, and the cluster housing is cleaned and polished. We pre-program the odometer to match the mileage on your donor unit: ship us a photo of the original cluster screen at key-on and we will match it exactly so your DOT record stays consistent.

Core Return and Warranty

Every refurbished cluster ships with a core-return label. Send us your old cluster within 30 days, undamaged, complete, no broken housings, and the core deposit is refunded. Every unit carries a 12-month functional warranty on the electronics rebuild. For fleet quotes on 5 or more units, contact us directly. Individual orders and questions both route through the nationwide mail-in contact page: include the VIN, the cluster part number and whether you need same-day outbound shipping.

If you prefer to keep your original cluster housing and serial, use our Volvo truck cluster rebuild and repair service instead. The electronics work done to both is identical; the only difference is whether we rebuild yours or supply a pre-built unit.